KATUMO Gasoline Siphon Hose, Hand Fuel Pump for Portable Fuel Transfer

Product Description: Efficient Hand Fuel Pump for Daily Simple and Emergency Needs

Specifications: - Material: Rubber / PVC / Metal - Outer Dia. of hose: 10mm / 0.39" - Thickness of hose: 2mm / 0.08" - Length of longer hose: 1.2 m / 47" - Length of shorter hose: 0.8 m / 31"

Note: The two hoses are in different sizes. The longer hose or the shorter hose can be placed at the source container or the target container based on your use condition.

Method 1 - Gravity Required: 1. The source fluid should be higher 11 inches or more than the target one (the greater the height difference, the better the effect). 2. Put the metal clips on one end of each hose, then connect the hoses to both ends of the pump bulb. 3. Secure the end of the hose and pump bulb with clips, to prevent fluid leakage. 4. Fix the hose to the container with the hose retainer, to keep the hose in the container and prevent it from slipping out. 5. Put the input hose into the source fluid, with the black arrow on the pump bulb pointing to the exit flow direction. 6. Squeeze the pump bulb 3 to 4 times. 7. When the liquid comes close to the pump bulb, place the outlet hose into the target container. Then the liquid will keep flowing naturally. 8. When the fluid level is too low at the bottom of the source container, the pressure will not be enough to keep the fluid flowing naturally, so you will need to keep squeezing the pump bulb by hand to finish the pumping job.

Method 2 - No Gravity Required: 1. There is no height difference required between the source container and target container, but you will need to KEEP squeezing the pump bulb BY HAND to finish the job. 2. Put the clip on one end of each hose, then connect the hoses to both ends of the pump bulb. 3. Secure the junction of the hose and pump bulb with a clip, to prevent fluid leakage. 4. Fix the hose to the container with the hose retainer, to keep the hose in the container and prevent it from slipping out. 5. Put the input hose into the source fluid, with the black arrow on the pump bulb pointing to the direction of flow. 6. Squeeze the pump bulb 3 to 4 times. 7. When the liquid comes close to the pump bulb, place the outlet hose into the target container. 8. Then keep squeezing the pump bulb continually with your hands to control the flow rate, until the transfer job is done.

Self-check Points When Siphon Pump Can't Work Normally: 1. The source container which you want to get rid of fluid is placed HIGHER than the target container when using the "Gravity Required" way. 2. Both the source container and the target one are not in a sealed state. 3. The indicator arrow on the pump bulb is not pointing towards the exit flow direction, down to the target container. 4. Both of the hoses are knotted or twisted together. 5. There is gas in the hoses that needs to be exhausted before using. 6. The ends of the two hoses are not kept inside the containers during use, but are just on the surface.

What You Get: - Pump Bulb x1 - Hose (31" / 47") x2 - Metal Clip x2 - Hose Retainer x1

[Premium Quality Rubber] - The pump bulb is made of high-quality rubber, thick and sturdy, with a built-in stop valve to prevent backflow of the fluid for siphoning liquid flow quicker and faster. The two flexible PVC transparent hoses are high-temperature and corrosion-resistant, allowing for visual liquid flow progress and long-term use.

[Clip and Retainer Use] - The two metal clips are for fixing the hoses in place with the pump bulb, preventing slippage or leakage. The adjustable hose retainer is for keeping the hose standing in the container or receiver, avoiding slipping out and allowing one-handed operation.

[Easy & Safe Siphon Pump] - Say goodbye to the dangerous and inefficient mouth suction way. Just connect the hoses to the pump bulb, with the black arrow pointing towards the fluid flow direction, put the upper hose into the source tank, and a few squeezes of the bulb will get the fluid started flowing, then put the lower hose into the receiver tank, and the fluid will flow automatically (the source fluid must be higher 11 inches or more than the receiver).

[Efficient Manual Siphon Pump] - The hand siphon hose pump is suitable for gasoline, oil, water, diesel, and other common liquids, making it ideal for emergency transfer. It also works well for fish tank / aquarium tank / small fountain / small air cushion swim pool water transfer. However, it is not suitable for edible oil, drinking water, salt water, and any chemical liquids.

[Multi-Use Manual Transfer Pump] - The lightweight hand siphon fuel pump is enough for simple daily use, suitable for medium and small-type equipment without an anti-theft filter net, such as brush cutters, lawn mowers, hedge trimmers, snow blowers, motorcycles, scooters, ATVs, and lawn tractors, but not for large truck types.

product information: